4 CH AMPLIFIER | ||
Number Of Channels | : | 4 |
RMS Continous Power | : | 75Watts x 4@4Ohm |
Total Power | : | 300Watts RMS |
Dynamic Power | : | 129Watts x 4@ 4Ohms 0o Res |
Frequency Response | : | 20Hz - 20KHz ±1dB |
Efficiency (average) | : | 80% @4Ohm |
Total Harmonic Distortion | : | 4Ohm <1,0% |
Input Sensitivity | : | 150mV to 4V |
Signal Input: Low Level | : | 2 RCA Pair |
Signal Output: Low Level | : | 1 RCA Pair |
Dimension | ||
Length | : | 11" |
Width | : | 7,4" |
Height | : | 1,57" |
5 CH AMPLIFIER | ||
Number Of Channels | : | 4 |
RMS Continous Power | : | 75Watts x 4@4Ohm |
Total Power | : | 300Watts RMS |
Dynamic Power | : | 129Watts x 4@ 4Ohms 0o Res |
Frequency Response | : | 20Hz - 20KHz ±1dB |
Efficiency (average) | : | 80% @4Ohm |
Total Harmonic Distortion | : | 4Ohm <1,0% |
Input Sensitivity | : | 150mV to 4V |
Signal Input: Low Level | : | 2 RCA Pair |
Signal Output: Low Level | : | 1 RCA Pair |
Dimension | ||
Length | : | 11" |
Width | : | 7,4" |
Height | : | 1,57" |
AMPLIFIER FOSS 4 CHANNEL & 5 CHANNEL
MINI IS THE MAX
Foss Amplifier Gain Clone 1000.4 a solution to the automotive world today. There are several advantages Foss amplifier Gain Clone 1000.4.
First, the design of the amplifier Foss Gain Clone 1000.4 adjust the development of contemporary automotive world. Cars now have a bit of a gap space for mounting the amplifier. It takes power amplifier maxi mini size.
Second, usually 4 channel amplifier with a power output of 75 Watts per chanel requires large heatsink to dissipate heat. The solution, implementing a class D amplifier that has a high efficiency of the heat. In the past, the class D amplifier is used only for the subwoofer. But technology class D amplifier FOSS applied accurately will increase the signal is fed to all of the speakers, as a class AB amplifier.
Third, luxurious and fashionable design with a glossy black piano finish style will make young users feel proud and satisfying.
As a result, the amplifier Foss tiny nimble not devour transients in low tones, but also medium and high pitch tone. Supported design compact and elegant black color will add to the feel of luxury in your vehicle.
Car audio systems typically rely on a simple two-way speakers <tweeter and midrange speakers> - in left and right and then subwoofer. So all there are 5 speakers. If the installation implement active system with bi amplifier 5 channel amplifier is needed to increase the signal that will be fed to the 5 speakers. By considering the installation in a car that has a bit of space, then Foss provide a sufficient solution to be able to turn the whole amplifier speakers.